 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PD - 95861 INSULATED GATE BIPOLAR TRANSISTOR IRG4BC40WS IRG4BC40WL C Features Designed expressly for Switch-Mode Power Supply and PFC (power factor correction) applications Industry-benchmark switching losses improve efficiency of all power supply topologies 50% reduction of Eoff parameter Low IGBT conduction losses Latest-generation IGBT design and construction offers tighter parameters distribution, exceptional reliability VCES = 600V G E VCE(on) typ. = 2.05V @VGE = 15V, IC = 20A n-channel Benefits Lower switching losses allow more cost-effective operation than power MOSFETs up to 150 kHz ("hard switched" mode) Of particular benefit to single-ended converters and boost PFC topologies 150W and higher Low conduction losses and minimal minority-carrier recombination make these an excellent option for resonant mode switching as well (up to >>300 kHz) D2Pak IRG4BC40WS TO-262 IRG4BC40WL Absolute Maximum Ratings Parameter VCES IC @ TC = 25C IC @ TC = 100C ICM ILM VGE EARV PD @ TC = 25C PD @ TC = 100C TJ TSTG Collector-to-Emitter Breakdown Voltage Continuous Collector Current Continuous Collector Current Pulsed Collector Current Clamped Inductive Load Current Gate-to-Emitter Voltage Reverse Voltage Avalanche Energy Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Max. 600 40 20 160 160 20 160 160 65 -55 to + 150 300 (0.063 in. (1.6mm) from case ) Units V A V mJ W C Thermal Resistance Parameter RJC RCS RJA Wt Junction-to-Case Case-to-Sink, Flat, Greased Surface Junction-to-Ambient (PCB Mounted steady-state) Weight Typ. 0.5 2.0 (0.07) Max. 0.77 40 Units C/W g (oz) www.irf.com 4/19/04 1 IRG4BC40WS/L Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)CES V(BR)ECS V(BR)CES/TJ VCE(ON) VGE(th) VGE(th)/TJ gfe ICES IGES Parameter Min. Typ. Max. Units Conditions Collector-to-Emitter Breakdown Voltage 600 V VGE = 0V, IC = 250A Emitter-to-Collector Breakdown Voltage 18 V VGE = 0V, IC = 1.0A Temperature Coeff. of Breakdown Voltage 0.44 V/C VGE = 0V, IC = 1.0mA 2.05 2.5 IC = 20A VGE = 15V Collector-to-Emitter Saturation Voltage 2.36 IC = 40A See Fig.2, 5 V 1.90 IC = 20A , TJ = 150C Gate Threshold Voltage 3.0 6.0 VCE = VGE, IC = 250A Temperature Coeff. of Threshold Voltage 13 mV/C VCE = VGE, IC = 250A Forward Transconductance 18 28 S VCE = 100 V, IC =20A 250 VGE = 0V, VCE = 600V Zero Gate Voltage Collector Current A 2.0 VGE = 0V, VCE = 10V, TJ = 25C 2500 VGE = 0V, VCE = 600V, TJ = 150C Gate-to-Emitter Leakage Current 100 nA VGE = 20V Switching Characteristics @ TJ = 25C (unless otherwise specified) Qg Qge Qgc td(on) tr td(off) tf Eon Eoff Ets td(on) tr td(off) tf Ets LE Cies Coes Cres Notes: Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Switching Loss Internal Emitter Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Min. Typ. 98 12 36 27 22 100 74 0.11 0.23 0.34 25 23 170 124 0.85 7.5 1900 140 35 Max. Units Conditions 147 IC =20A 18 nC VCC = 400V See Fig.8 54 VGE = 15V TJ = 25C ns 150 IC = 20A, VCC = 480V 110 VGE = 15V, RG = 10 Energy losses include "tail" mJ See Fig. 9,10, 14 0.45 TJ = 150C, IC = 20A, VCC = 480V ns VGE = 15V, RG = 10 Energy losses include "tail" mJ See Fig. 10,11, 14 nH Measured 5mm from package VGE = 0V pF VCC = 30V See Fig. 7 = 1.0MHz Repetitive rating; VGE = 20V, pulse width limited by max. junction temperature. ( See fig. 13b ) (See fig. 13a) VCC = 80%(VCES), VGE = 20V, L = 10H, RG = 10, Repetitive rating; pulse width limited by maximum junction temperature. Pulse width 80s; duty factor 0.1%. Pulse width 5.0s, single shot. 2 www.irf.com IRG4BC40WS/L 50 For both: Triangular wave: 40 Load Current ( A ) Duty cycle: 50% TJ = 125C Tsink = 90C Gate drive as specified Power Dissipation = 28W Clamp voltage: 80% of rated 30 Square wave: 60% of rated voltage 20 10 Ideal diodes 0 0.1 1 10 100 A 1000 f, Frequency (kHz) Fig. 1 - Typical Load Current vs. Frequency (Load Current = IRMS of fundamental) 1000 1000 I C , Collector-to-Emitter Current (A) TJ = 25 C 100 I C , Collector-to-Emitter Current (A) 100 TJ = 150 C TJ = 150 C 10 10 TJ = 25 C 1 1.0 V GE = 15V 80s PULSE WIDTH 2.0 3.0 4.0 5.0 1 5 7 V CC = 50V 5s PULSE WIDTH 9 11 VCE , Collector-to-Emitter Voltage (V) VGE , Gate-to-Emitter Voltage (V) Fig. 2 - Typical Output Characteristics Fig. 3 - Typical Transfer Characteristics www.irf.com 3 IRG4BC40WS/L 50 3.0 VCE , Collector-to-Emitter Voltage(V) VGE = 15V 80 us PULSE WIDTH IC = 40 A Maximum DC Collector Current(A) 40 2.5 30 2.0 IC = 20 A IC = 10 A 20 1.5 10 0 25 50 75 100 125 150 1.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 TC , Case Temperature ( C) TJ , Junction Temperature ( C) Fig. 4 - Maximum Collector Current vs. Case Temperature Fig. 5 - Typical Collector-to-Emitter Voltage vs. Junction Temperature 1 Thermal Response (Z thJC ) D = 0.50 0.20 0.1 0.10 0.05 0.02 0.01 PDM t1 SINGLE PULSE (THERMAL RESPONSE) t2 Notes: 1. Duty factor D = t 1 / t2 2. Peak T = PDM x Z thJC + TC J 0.001 0.01 0.1 1 0.01 0.00001 0.0001 t1 , Rectangular Pulse Duration (sec) Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case 4 www.irf.com IRG4BC40WS/L 4000 VGE , Gate-to-Emitter Voltage (V) VGE = 0V, f = 1MHz Cies = Cge + Cgc , Cce SHORTED Cres = Cgc Coes = Cce + Cgc 20 VCC = 400V I C = 20A 16 C, Capacitance (pF) 3000 Cies 2000 12 8 Coes 1000 Cres 4 0 1 10 100 0 0 20 40 60 80 100 VCE , Collector-to-Emitter Voltage (V) QG , Total Gate Charge (nC) Fig. 7 - Typical Capacitance vs. Collector-to-Emitter Voltage Fig. 8 - Typical Gate Charge vs. Gate-to-Emitter Voltage 1.0 Total Switching Losses (mJ) 0.8 0.7 0.6 0.5 0.4 0.3 10 20 30 40 50 60 Total Switching Losses (mJ) V CC = 480V V GE = 15V 0.9 TJ = 25 C I C = 20A 10 RG = 10 10Ohm VGE = 15V VCC = 480V IC = 40 A 1 IC = 20 A IC = 10 A RG , Gate Resistance() (Ohm) 0.1 -60 -40 -20 0 20 40 60 80 100 120 140 160 TJ , Junction Temperature ( C ) Fig. 9 - Typical Switching Losses vs. Gate Resistance Fig. 10 - Typical Switching Losses vs. Junction Temperature www.irf.com 5 IRG4BC40WS/L 2.0 1.5 1.0 0.5 I C , Collector-to-Emitter Current (A) Total Switching Losses (mJ) RG TJ VCC VGE =10 10Ohm = 150 C = 480V = 15V 1000 VGE = 20V T J = 125 oC 100 0.0 5 15 25 35 45 SAFE OPERATING AREA 10 1 10 100 1000 I C , Collector-to-emitter Current (A) VCE , Collector-to-Emitter Voltage (V) Fig. 11 - Typical Switching Losses vs. Collector-to-Emitter Current Fig. 12 - Turn-Off SOA 6 www.irf.com IRG4BC40WS/L L 50V 1000V VC * 0 - 480V D.U.T. RL = 480V 4 X IC@25C c 480F 960V d * Driver same type as D.U.T.; Vc = 80% of Vce(max) * Note: Due to the 50V power supply, pulse width and inductor will increase to obtain rated Id. Fig. 13a - Clamped Inductive Load Test Circuit Fig. 13b - Pulsed Collector Current Test Circuit IC L Driver* 50V D.U.T. VC Fig. 14a - Switching Loss Test Circuit * Driver same type as D.U.T., VC = 480V A 1000V d e c d 90% e VC 90% 10% t d(off) Fig. 14b - Switching Loss Waveforms 10% IC 5% t d(on) tr E on E ts = (Eon +Eoff ) tf t=5s E off www.irf.com 7 IRG4BC40WS/L D2Pak Package Outline Dimensions are shown in millimeters (inches) D2Pak Part Marking Information T HIS IS AN IRF530S WIT H LOT CODE 8024 AS SEMBLED ON WW 02, 2000 IN T HE AS SEMBLY LINE "L" Note: "P" in assembly line pos ition indicates "Lead-Free" INT ERNAT IONAL RECT IFIER LOGO AS SEMBLY LOT CODE PART NUMBER F530S DAT E CODE YEAR 0 = 2000 WEEK 02 LINE L OR INT ERNAT IONAL RECT IFIER LOGO ASS EMBLY LOT CODE PART NUMBER F530S DAT E CODE P = DES IGNAT ES LEAD-FREE PRODUCT (OPT IONAL) YEAR 0 = 2000 WEEK 02 A = AS SEMBLY SIT E CODE 8 www.irf.com IRG4BC40WS/L TO-262 Package Outline Dimensions are shown in millimeters (inches) IGBT 1- GATE 2- COLLEC- TO-262 Part Marking Information EXAMPLE: T HIS IS AN IRL3103L LOT CODE 1789 AS S EMBLED ON WW 19, 1997 IN T HE AS S EMBLY LINE "C" Note: "P" in assembly line position indicates "Lead-Free" INTERNATIONAL RECT IFIER LOGO AS S EMBLY LOT CODE PART NUMBER DAT E CODE YEAR 7 = 1997 WEEK 19 LINE C OR INTERNAT IONAL RECT IFIER LOGO AS S EMBLY LOT CODE PART NUMBER DAT E CODE P = DES IGNAT ES LEAD-FREE PRODUCT (OPTIONAL) YEAR 7 = 1997 WEEK 19 A = AS S EMBLY S ITE CODE www.irf.com 9 IRG4BC40WS/L D2Pak Tape & Reel Information Dimensions are shown in millimeters (inches) TRR 1.60 (.063) 1.50 (.059) 4.10 (.161) 3.90 (.153) 1.60 (.063) 1.50 (.059) 0.368 (.0145) 0.342 (.0135) FEED DIRECTION 1.85 (.073) 1.65 (.065) 11.60 (.457) 11.40 (.449) 15.42 (.609) 15.22 (.601) 24.30 (.957) 23.90 (.941) TRL 10.90 (.429) 10.70 (.421) 1.75 (.069) 1.25 (.049) 16.10 (.634) 15.90 (.626) 4.72 (.136) 4.52 (.178) FEED DIRECTION 13.50 (.532) 12.80 (.504) 27.40 (1.079) 23.90 (.941) 4 330.00 (14.173) MAX. 60.00 (2.362) MIN. NOTES : 1. COMFORMS TO EIA-418. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION MEASURED @ HUB. 4. INCLUDES FLANGE DISTORTION @ OUTER EDGE. 26.40 (1.039) 24.40 (.961) 3 30.40 (1.197) MAX. 4 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 4/04 10 www.irf.com |
Price & Availability of IRG4BC40WS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |